 |
|
|
| |
This year, Prometheus is celebrating its 20th anniversary. In commemoration, we are releasing a number of limited edition anniversary products: Cutters, Lighters and Humidors. |
|
|
2012 Limited Edition 20th Anniversary Cutter H
Stainless steel double blades
60 ring gauge
2.62 in x 1.62 in x 0.44 in
28 mm x 41 mm x 12 mm
Total release quantity: 1,000
Each cutter is serial-numbered.
MSRP $79.95 |
| |
| |
 |
Cutter-H/PW, White 20th Anniversary |
| |
 |
Cutter-H/PA, Black 20th Anniversary |
| |
 |
Seriel-Numbered |
2012 Limited Edition 20th Anniversary Ultimo X
Jet turbo, triple torch flame, wind-resistant
with built-in punch cutter (U.S. Patent 6,298,856 & ,732,741)
2.87 in x 1.45 in x 0.55 in
73 mm x 37 mm x 14 mm
Total release quantity: 1,000
Each lighter is serial-numbered.
MSRP $89.95 |
| |
| |
 |
Ultimo-XW, White 20th Anniversary |
| |
 |
Serial-Numbered |
| |
|
Ultimo-XA, Black 20th Anniversary |
| |
|
|
|
Gas level shows in blue |
Built-in punch cutter. U.S. patent 6,298,856 and 6,732,741 |
| |
|
2012 Limited Edition 20th Anniversary Retro
Jet turbo, torch flame, wind-resistant
Flint ignition system
3.00 in x 1.37 in x 0.25 in
75 mm x 35 mm x 7 mm
Total release quantity: 1,000
Each lighter is serial-numbered.
MSRP $85.00 |
| |
| |
|
 |
Retro-PW, White 20th Anniversary |
| |
 |
Serial-Numbered |
| |
|
 |
Retro-PA, Black 20th Anniversary |
|
Retro Lighter Review by Cigar Aficionado
It may sound a bit odd to describe the Retro butane lighter by Prometheus as “wallet-friendly,” but at a mere .25 inches thick, or about six stacked credit cards high, the description seems apt. Cigar enthusiasts looking for a svelte lighter should take note of the Retro, as it's not only the thinnest butane torch we've seen, but reliable and solidly constructed. READ MORE |
2012 Limited Edition 20th Anniversary Magma T
Jet turbo, triple torch flame, wind-resistant
with built-in punch cutter (U.S. Patent 6,298,856 & 6,732,741)
3.56 in x 2.80 in x 0.94 in
90 mm x 55 mm x 24 mm
Total release quantity: 1,000
Each lighter is serial-numbered.
MSRP $89.95 |
| |
| |
 |
Magma-T/PW, White 20th Anniversary |
| |
 |
Serial-Numbered |
| |
 |
Magma-T/PA, Black 20th Anniversary |
|
Prometheus Magma T Lighter Review by Brent Butterworth
Every cigar lover needs at least two lighters: one to slip into your pocket, and a table model that holds plenty of fuel and cannot easily be lost between scotch bottles. The Prometheus Magma T was designed to fill the latter need—but it is much more than an ordinary table lighter.
Flip open the top, squeeze the large trigger on the side, and the Magma T’s triple torch flames leap to life, delivering sufficient heat to light even 60-ring-gauge cigars in seconds.
The bottom cover incorporates two bullseye punches, in a standard ¼-inch size (7 mm) and an extra-large 3/8-inch size (10.5 mm) perfect for the big cigars I prefer. Both cutters close onto posts that push out the cut cigar end, so you do not have to go looking for a toothpick to unclog the cutters.
The Magma T offers the best fuel gauge I have seen on a lighter. Instead of using the transparent fuel itself as a gauge, it uses a special mechanism which shows the gas level in blue. It is much easier to see the blue gas level than clear butane. No more turning the lighter upside down or holding it up to a lamp to see the fuel level.
I enjoy the Magma T so much that I even carried it along on a recent car trip, where its unique features made my journey all the more satisfying. I even slipped the big lighter into my pocket for a long stroll. After all, what is a few extra ounces when you can carry a lighter as luxurious as this one?
Product Review by Cigar Aficionado
"With a flick of the thumb, the top-cap opens to reveal a triple-torch flame that is activated by a trigger on the side of the lighter's body. The trigger is sturdy and, when pressed, emits a distinct clicking sound before the flame is revealed. - - - the Magma T features two punch cutters, one a standard 1/4-inch punch and the other a larger 3/8-inch circle, on it's base that are revealed by pressing a tiny safety latch. When the cutters are closed back onto the body, two posts (one is actually the flame adjuster) on the lighter conveniently knock the cut cigar cap out of the punch so you don't have to." READ MORE
|
| |
|
|
Size comparison to iPhone 3G |
Triple Torch Flame |
|
|
|
|
Gas level shows in blue |
Built-in punch cutter. U.S. patent 6,298,856 and 6,732,741 |
| |
|
The 2012 Limited Edition Prometheus 20th Anniversary Humidors |
|
| |
Made in France
Total Release Quantity: 60 Limited Edition
20 Red Sycamore
20 Walnut
20 Macassar Ebony
Each humidor is serial-numbered and comes with a certificate of authenticity.
Storage Capacity: 150 cigars
External Dimensions of Humidor: 17 inches Wide x 9.75 Deep x 5.5 High (43 cm W x 25 D x 14 H)
Each humidor comes with 50 God of Fire cigars in 5 sizes:
10 God of Fire by Don Carlos, Toro (50 x 6)
10 God of Fire by Carlito, Double Corona (49 x 7 5/8)
10 God of Fire by Carlito, Piramide (52 x 6 3/8)
10 God of Fire Serie B Gran Toro (56 x 6)
10 God of Fire Serie B Robusto Gordo (54 x 5 1/2)
MSRP $3,000.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
